|
CONTACT FOR PRICING
|
The Martin VDO Atomic Dot CLD hybrid lighting and video fixture, also available in a WRM color temperature variant, combines a compact strobe, small blinder, video-pixel and small spotlight.
By combining a video-controlled Aura backlight and a bright strobe/blinder dot in one fixture, lighting designers are empowered with greater creative potential to make a bigger impact with audiences than ever before. The fixtures’ compact design also gives designers the ability to place VDO Atomic Dots just about anywhere and deploy them in larger quantities. Integrated support for P3, DMX, Art-Net and sACN eliminates the need for additional interface boxes and onboard P3 eases pixel mapping and using the product as a video controlled strobe or blinder. VDO Atomic Dots are ideal for rental customers and lighting designers working in concert/touring and TV show sets as well as supporting corporate and nightclub clients. |
FEATURES
- High power cold white beam (5700K)
- Beam angle of 11 degrees
- Field angle of 22 degrees
- Pixel-controllable RGB Aura backlight
- Compact form-factor
- Built-in power supply (100-240V)
- Power and Data IN & THRU via hybrid cable
- P3, DMX, Art-Net & sACN compatible
- Built-in pixel-FX on backlight and beam
- Front-accessory holder for barndoors and/or diffuser/lens
- Detachable yoke-assembly
- Smart interlocking mechanics to build battens, arrays and creative shapes
- Passive cooling
- IP65-rated
SPECIFICATIONS
|
PHYSICAL
Fixture: Width: 175 mm (incl. hanging bracket) (150mm fixture center-to-center using interlock couplers) Height: 138 mm (150mm fixture center-to-center using interlock couplers) Depth: 146 mm Weight: 2.2 kg PDE Junction Box: Width: 94 mm Height: 50 mm Depth: 106 mm Weight: 0.5 kg DYNAMIC EFFECTS Strobe: 0.289 – 16.667Hz, variable flash rate, intensity and duration (incl. blinder mode) Aura: RGB control per pixel, 16 pixels Built-in FX: Various pre-programmed FX on Strobe, Aura and combination of both CONTROL AND PROGRAMMING Control Protocols: DMX, RDM, Art-Net, sACN and P3 Protocol detection: Automatic Setting and addressing: RDM or P3 DMX channels: 1, 3, 4, 19, 64 Fixture Identification: User-settable ID number DMX compliance: USITT DMX512-A RDM compliance: ANSI/ESTA E1.20 Art-Net Compliance: Art-Net 1, 2, 3 and 4; including RDM over Art-Net sACN Compliance: ANSI E1.31 Martin P3 Compliance: P3 System Controller Software 5.1.0 or newer DMX/RDM Transceiver: RS-485 Ethernet Transceiver: 10/100Mbit Firmware update: Via DMX using Martin Companion or via Ethernet using P3 System Controller CONTROL/USER INTERFACE Device status: Multi-color status LED Device test and reset: Pushbutton to call up local test patterns and reset device OPTICS AND PHOTOMETRIC DATA Beam/Strobe LED: Max. total lumen output: 3350 lumens CRI (Color Rendering Index): >80 Beam Angle: 11 Degrees (half peak) Field Angle: 22 Degrees (one-tenth peak) Color Temperature: 5700 K Resolution: 16-bit Minimum LED lifetime: 50,000 hours (to >70% luminous output) Aura Backlight LEDs: Color Temperature: Variable Resolution: 16-bit per color per pixel Minimum LED lifetime: 50,000 hours (to >70% luminous output) P3 VIDEO PROCESSING Color Resolution: 16 bit per color (48 bit per pixel) Color Temperature Control: 2000-11000 K (Aura) Synchronization: System-wide Frame Rate: Up to 75 frames/sec Brightness Control: 0-100% (maintaining full color depth) Gamma Correction: Fully controllable Gamma Control: Fully controllable Color Gamut Control: Full spectrum control (Aura) CONSTRUCTION Housing: Aluminum Color: Black Protection rating: IP65 RoHS: Compliant REACH: Compliant INSTALLATION Mounting options: Hanging from bracket, hanging from clamp attached directly to fixture or hanging from other fixture using interlock mechanism Location: Indoor or temporary outdoor use Clamp attachment to hanging bracket: M12 Clamp attachment directly to fixture: M8 Maximum vertical column height: 16 fixtures Orientation: Any Minimum distance to combustible materials: 0.1 m Minimum distance to illuminated surfaces: 0.2 m CONNECTIONS VDO Atomic Dot Fixture: AC Power, DMX and Network input: cable tail with PDE hybrid connector (IP65) AC Power, DMX and Network thru: chassis-mount PDE hybrid connector (IP65) All connections hot plugging compatible PDE Junction Box : AC Power input: Neutrik powerCON TRUE1 TOP (IP65 when mated with matching Neutrik cable connector) DMX input: Neutrik XLR 5-pin Male TOP (IP65 when mated with matching Neutrik cable connector) (compatible with standard 5-pin XLR connectors) Ethernet input: Neutrik etherCON TOP (IP65 when mated with matching Neutrik cable connector) (compatible with standard etherCON Cat 5E and Cat 6A) (NOT compatible with etherCON Cat 6 push-pull) AC Power, DMX and Network thru: Chassis-mount PDE hybrid connector (IP65) All connections hot plugging compatible |
ELECTRICAL
AC power: 100-240 V AC nominal, 50/60Hz Power supply unit: Auto-ranging electronic switch mode Typical half-cycle RMS inrush current: 1.12 A Maximum power consumption: 55 W Typical earth-leakage current: 0.25 mA TYPICAL POWER AND CURRENT 100 V, 60 Hz: 49.0 W, 0.49 A, PF 0.99 120 V, 60 Hz: 48.9 W, 0.41 A, PF 0.98 208 V, 60 Hz: 48.6 W, 0.24 A, PF 0.95 230 V, 50 Hz: 50.2 W, 0.23 A, PF 0.96 240 V, 50 Hz: 49.6 W, 0.22 A, PF 0.94 Measurements made at nominal voltage with all LEDs at full intensity. Allow for a deviation of +/- 10%. PF = power factor. THERMAL Cooling: Convection Maximum ambient temperature (Ta max.): 40° C Minimum ambient temperature (Ta min.): 0° C Typical heat dissipation (calculated, +/- 10%): 171 BTU/hr APPROVALS EU safety: EN 60598-2-17 (EN 60598-1), EN 62471, EN 62493 EU EMC: EN 55015, EN 55032, EN 55103-2, EN 61000-3-2, EN 61000-3-3, EN 61547 US safety: UL 1573 US EMC: 47 CRF §15 Class B Canadian safety: CSA 22.2 No. 166 Canadian EMC: ICES-003 Class B, ICES-005 Class B Australia/NZ: RCM ACCESSORIES Flightcase: Flightcase for 15 x VDO Atomic Dot: P/N 91515053 Flightcase Extender for 15 x VDO Atomic Dot: P/N 91515054 Junction Box: Junction Box Power-DMX-Ethernet to PDE: P/N 91610001 Optical Accessories: VDO Atomic Dot Diffuser 60 Degrees: P/N 91610002 VDO Atomic Dot Diffuser 30 Degrees: P/N 91610005 Mechanical Accessories: Super Lightweight Half Coupler Rigging Clamp, black: P/N 91602018 G-clamp (vertical hanging installation only): P/N 91602003 Half-coupler clamp: P/N 91602005 Quick trigger clamp (vertical hanging installation only): P/N 91602007 Safety Cable, SWL 60 kg, BGV C1 / DGUV 17, black: P/N 91604006 Safety Cable, SWL 60 kg, BGV C1 / DGUV 17, silver: P/N 91604007 Set of 10 VDO Atomic Dot Couplers: P/N 91610003 VDO Atomic Dot Half Coupler: P/N 91610004 VDO Atomic Dot Interlock Adapter: P/N 91610006 VDO Atomic Dot Pivot Coupler: P/N 91610007 VDO Atomic Dot Double Width Bracket: P/N 91616117 VDO Atomic Spigot Adapter 28mm: P/N MAR-91616118 Pre-Assembled Hybrid PDE Cables: Power+Data Cable Rental PDE-PDE 1m: P/N 91616001 Power+Data Cable Rental PDE-PDE 2,5m: P/N 91616002 Power+Data Cable Rental PDE-PDE 5m: P/N 91616003 Power+Data Cable Rental PDE-PDE 10m: P/N 91616004 Power+Data Cable Rental PDE-PDE 25m: P/N 91616005 Bulk Hybrid PDE Cable and Connectors: Power+Data Connector PDE Male: P/N 91611701 Power+Data Connector PDE Female: P/N 91611702 Power+Data Cable Power-DMX-Ethernet Rental 100m: P/N 91616006 Powercables for Junction Box: Power Input Cable, H07RN-F, 2.5 mm2, bare ends to TRUE1, 1.5 m (4.9 ft.): P/N 91611797 Power Input Cable, H07RN-F, 2.5 mm2, bare ends to TRUE1, 5 m (16.4 ft.): P/N 91611786 Power Input Cable, SJOOW, 12 AWG, bare ends to TRUE1, 1.5 m (4.9 ft.): P/N 91610173 Power Input Cable, SJOOW, 12 AWG, bare ends to TRUE1, 5 m (16.4 ft.): P/N 91610174 Cable Connector, Neutrik PowerCON TRUE1 Female: P/N 91611789HU DemoKit: DO Atomic Dot Demo Kit: P/N 91311001 RELATED ITEMS VDO Atomic Dot WRM in cardboard: P/N 90357702 Martin P3-050™ System Controller: P/N 90721090 Martin P3-150™ System Controller: P/N 90721015 Martin P3-300™ System Controller: P/N 90721060 Martin P3-PC™ System Controller: Free download from martin.com Martin™ RDM 5.5 Splitter: P/N 90758150 Martin Companion Cable (for firmware update over DMX): P/N 91616091 ORDERING INFORMATION VDO Atomic Dot CLD in cardboard : P/N 90357701 |