|
CONTACT FOR PRICING
|
The VC-Strip family of narrow LED video strips is ideal for integration of video into stage and set designs, interiors, custom set elements and more. VC-Strips are fully pixel-level calibrated on brightness and colors for optimal uniformity and quality and are driven by Martin’s award-winning P3 System Controller family for smooth playback that outperforms any DMX-based system. VC-Strips are available in various lengths and can even be cut to required length on-site.
|
FEATURES
- 8/4 individually controllable pixels
- 60 mm pixel pitch
- 750 nits of brightness
- High-quality, 16-bit per color image processing technology
- Pixel-level brightness and color calibration for optimal image quality
- P3/DMX controllable (automatic protocol detection)
- Intuitive mapping and addressing via P3 System Controller
- Combined power/data input (single cable for power and data input)
- Combined power/data thru (to daisy-chain up to 63 VC-Strip 60s)
- Supported by integrated power and data processor (P3 PowerPort 1500) and simple cabling system
- Length of VC-Strip can be customized on-site (simple cutting) to fit integration needs
- Compatible with VC-Grid 60
SPECIFICATIONS
|
PHYSICAL
VC-Strip 8x1 60™: Length: 480 mm (18.9 in.) * Width: 19 mm (0.8 in.) Height: 15 mm (0.6 in.) Weight: 53 g (0.12 lbs.) VC-Strip 4x1 60™: Length: 240 mm (9.5 in.) * Width: 19 mm (0.8 in.) Height: 15 mm (0.6 in.) Weight: 32 g (0.07 lbs.) *Including 1 mm board-to-board gap CONTROL AND PROGRAMMING Control options: Martin P3 System Controller™ via Martin P3 PowerPort 1500™ and/or DMX Control modes: Pixel and module Control resolution: 16-bit (P3) or 8-bit (DMX) control of each color Protocol detection: AutomaticSetting and addressing: P3 System Controller or RDM-compliant controller DMX channels: Pixel mode 8x1 model = 24, 4x1 model = 12; Module mode (all models) = 3 Color and intensity calibration: Pixel-level DMX compliance: USITT DMX512-A RDM compliance: ANSI/ESTA E1.20 Firmware update: Via P3 System Controller CONTROL/USER INTERFACE Device status: Multi-color visual indication Device test and reset: Pushbutton to call up local test patterns and reset device OPTICS Minimum LED lifetime: 50,000 hours (to >70% luminous output)* *Figure obtained under manufacturer´s test conditions PHOTOMETRIC DATA Pixels: 8/4 per module Luminous intensity, calibrated mode: 750 Nit Viewing angle: 120° x 120° Preliminary data, figures are approximate. P3 VIDEO PROCESSING Color Resolution: 16 bits per color (48 bit per pixel) Color Temperature Control: 2000K-11000K Synchronization: System-wideFrame Rate: Up to 75 frames/sec Brightness Control: 0-100% (at full color resolution) Gamma Correction: Fully controllable Gamma Control: Fully controllable Color Gamut Control: Fully controllableLED aging correction: Built-in CONSTRUCTION Base: Black FR4 circuit board Protection rating: IP20 RoHS compliant INSTALLATION Mounting: Mounting holes in module Orientation: Any Maximum number of VC-Strip™ 8x1 60 modules per daisy-chain: 63 Maximum number of VC-Strip™ 4x1 60 modules per daisy-chain: 63 CONNECTIONS Power & data input: 4-pin Molex connector Power & data thru: 4-pin Molex connector |
ELECTRICAL
Nominal input voltage: 48 VDC from Martin P3 PowerPort 1500™ or external PSU Peak power consumption (at full intensity, full white): 8x1 model 4 W; 4x1 model 2 W Typical power consumption (with typical video content): 8x1 model 1.5 W; 4x1 model 0.7 W Figures for typical video content are indicative only and will vary. Power consumption figures include cable and assume a 50 m chain THERMAL Cooling: Convection Maximum ambient temperature (Ta max.): 45° C Minimum ambient temperature (Ta min.): -20° C Peak heat dissipation (calculated, at full intensity, full white): 8x1 model 14 BTU/hr.; 4x1 model 7 BTU/hr. Typical heat dissipation (calculated, with typical video content): 8x1 model 5.5 BTU/hr.; 4x1 model 2.5 BTU/hr. Figures for typical video content are indicative only and will vary. APPROVALS EU safety: EN 60950 EU EMC: EN 55022, EN 55024, EN 61000-3-2, EN 61000-3-3 US safety: ANSI/UL 60950-1 Canadian safety: CSA C22.2 No. 60950-1 ACCESSORIES Input cables: Power+Data Adapter, XLR4-to-PCB, 0.25 m (0.9 ft.): P/N 91616035 Power+Data Adapter, XLR5+Power-to-XLR4, 0.25 m (0.9 ft.): P/N 91616037 Power+Data Adapter, XLR5+XLR4-to-XLR4, 0.25 m (0.9 ft.): P/N 91616038 Power+Data Adapter, XLR5+Tripix-to-XLR4, 0.25 m (0.9 ft.): P/N 91616039 VC-Strip to VC-Strip link cables: Power+Data Cable, PCB-to-PCB, 200 mm (7.9 in.): P/N 91616025 Power+Data Cable, PCB-to-PCB, 400 mm (15.8 in.): P/N 91616026 Power+Data Cable, PCB-to-PCB, 600 mm (23.7 in.): P/N 91616027 Power+Data Cable, PCB-to-PCB, 800 mm (31.5 in.): P/N 91616028 Power+Data Cable, PCB-to-PCB, 1000 mm (39.4 in.): P/N 91616029 Extension cables: Power+Data Cable, XLR4-to-XLR4, 1 m (3.3 ft.): P/N 91616030 Power+Data Cable, XLR4-to-XLR4, 2.5 m (8.2 ft.): P/N 91616031 Power+Data Cable, XLR4-to-XLR4, 5 m (16.4 ft.): P/N 91616032 Power+Data Cable, XLR4-to-XLR4, 10 m (32.8 ft.): P/N 91616033 Power+Data Cable, XLR4-to-XLR4, 25 m (82.1 ft.): P/N 91616034 Output/throughput cables: Hybrid Output/Thru Cable, PCB-to-XLR4, 0.25 m (0.9 ft.): P/N 91616036 Power+Data Adapter, XLR4-to-XLR5, 0.25 m (0.9 ft.): P/N 91616040 Cable without connectors: Power+Data Cable, Rental, 100 m (328.1 ft.): P/N 91616045 Power+Data Cable, Install CMX, 100 m (328.1 ft.): P/N 91616060 Power+Data Cable, Install LSZH, 100 m (328.1 ft.): P/N 91616017 RELATED ITEMS Martin P3™ PowerPort 1500: P/N 90721040 Martin DMX PowerPort 375: P/N 90721094 Martin™ IP66 PSU 240 W external power supply unit: P/N 90760330 Martin P3-050™ System Controller: P/N 90721090 Martin P3-150™ System Controller: P/N 90721015 Martin P3-300™ System Controller: P/N 90721060 Martin P3-PC™ System Controller: Free download from martin.com ORDERING INFORMATION VC-Strip™ 8x1 60 RGB: P/N 90357480 (to be ordered in multiples of 10) VC-Strip™ 4x1 60 RGB: P/N 90357490 (to be ordered in multiples of 20) |