|
CONTACT FOR PRICING
|
The RUSH PAR 4 UV is a bright single-lens UV LED PAR can light fixture for use in blacklight applications. The fixture includes a 100 watt COB 400nm UV LED mounted in a reflector for high-output ultraviolet light, and has regulated air cooling for quiet operation. With electronic dimming and strobe and a bracket suitable for floor or truss mounting, the RUSH PAR 4 UV is ideal for a variety of nightlife, stage, and concert applications.
|
FEATURES
- 100 watt COB 400nm UV LED
- Forced air cooling for quiet operation
- Electronic dimming and strobe
- Bracket suitable for floor or truss mounting
- Lightweight construction (4 kg / 8.8 lbs.)
SPECIFICATIONS
|
PHYSICAL Length: 327 mm (12.8 in.) Width: 312 mm (12.3 in.) Height: 207 mm (8.1 in.) Weight: 4 kg (8.8 lbs.) DYNAMIC EFFECTS Dimming: 0 – 100%, coarse & fine control Shutter: Strobe & pulse effects, instant open and blackout CONTROL AND PROGRAMMING Control systems: USITT DMX512/1990 with RDM DMX channels: 3 RDM compliance: ANSI/ESTA E.120 Interface: Control panel with backlit LCD display CONSTRUCTION Housing: Cast aluminum Color: Black Protection rating: IP20 INSTALLATION Mounting points: Adjustable bracket, surface or truss mount Location: Indoor location only Orientation: Any Minimum distance to combustible materials: 0.1 m (4 in.) Minimum distance to illuminated surfaces: 0.5 m (20 in.) CONNECTIONS AC power input/output: Neutrik PowerCon DMX/RDM in/out: 5-pin locking XLR RUSH PAR 4 UV User Manual 31 ELECTRICAL AC power: 100-240 V nominal, 50/60 Hz Power supply unit: Auto-ranging electronic switch mode Typical half-cycle RMS inrush current: 11.2 A Recommended Miniature Circuit Breaker when power linking: Type D* *Per IEC 60898/UL489/CSA C22.2 No. 5 Maximum total power consumption: 114 W TYPICAL POWER AND CURRENT 100 V, 60 Hz: 114 W, 1.2 A, PF 1.000 120 V, 60 Hz: 114 W, 1.0 A, PF 0.996 230 V, 50 Hz: 114 W, 0.5 A, PF 0.933 Measurements made at nominal voltage. Figures are typical, not maximum, allow for a deviation of +/- 10%. THERMAL Cooling: Forced air, temperature-regulated Maximum ambient temperature (Ta max.): 40° C (104° F) Minimum ambient temperature (Ta min.): 0° C (32° F) |
APPROVALS
EU safety: EN 60598-2-17 (EN 60598-1), EN 62471, EN 62493 EU EMC: EN 55015, EN 55032, EN 55103-2, EN 61000-3-2, EN 61000-3-3, EN 61547 US safety: UL 1573 US EMC: 47 CFR 15 Class A Canadian safety: CSA C22.2 No. 166 Canadian EMC: ICES-003 Class A Australia/NZ: RCM INCLUDED ITEMS Power cable, 1.5 m without mains plug ACCESSORIES Power connectors: Power Connector PowerCON Male: P/N 91611795 Power Connector PowerCON Female: P/N 91611794 Cables, 16 A, for connection to power in chains: Power relay cable 3 x 2.5 mm2, H07RN-F POWCON-POWCON 1.2 m (3.9 ft.): P/N 91611798 Power relay cable 3 x 14 AWG, SJOOW POWCON-POWCON 1.2m (3.9 ft.): P/N 91610175 Power relay cable 3 x 2.5 mm2, H07RN-F POWCON-POWCON 2.5m (8.2 ft.): P/N 91611799 Power relay cable 3 x 14 AWG,SJOOW POWCON-POWCON 2.5m (8.2 ft.): P/N 91610176 Cables, 16 A, for power input: Power input cable 3 x 2.5 mm2, H07RN-F OPEN-POWCON 1.5 m (4.9 ft.): P/N 91611800 Power input cable 3 x 14 AWG, SJOOW OPEN-POWCON 1.5 m (4.9 ft.): P/N 91610177 Power input cable 3 x 2.5 mm2, H07RN-F OPEN-POWCON 5.0 m (16.4 ft.): P/N 91611801 Power input cable 3 x 14 AWG, SJOOW OPEN-POWCON 5.0 m (16.4 ft.): P/N 91610178 (H07RN-F are European approved cables, SJOOW are US approved cables) Installation hardware: Half-coupler clamp: P/N 91602005 G-clamp (vertical hanging suspension only): P/N 91602003 Quick-trigger clamp (vertical hanging suspension only): P/N 91602007 Safety Cable, SWL 60 kg, BGV C1 / DGUV 17, black: P/N 91604007 Safety Cable, SWL 60 kg, BGV C1 / DGUV 17, silver: P/N 91604006 RELATED ITEMS Martin™ RDM 5.5 Splitter: P/N 90758150 Martin Companion Cable: P/N 91616091 Martin Companion Software Suite (including firmware uploader): Free download from www.martin.com ORDERING INFORMATION RUSH PAR 4 UV in cardboard box: P/N 90480140 |