|
CONTACT FOR PRICING
|
The Martin RDM 5.5 Splitter is the perfect companion to any controller or DMX/RDM device. The main purpose of the Martin 5.5 Splitter is to maintain proper data over long or several runs of DMX signal. The Splitter boosts the weak DMX signal to its original output level before it becomes too low to be read by DMX devices. Disruption of DMX is often caused by bad cables or bad connections. The Martin RDM 5.5 Splitter will help to rectify the signal.
|
FEATURES
- DMX Splitter / Booster
- Opto-isolated DMX Output ports
- DMX loop through port with built-in termination
- 5-pin XLR Input and Outputs
- RDM E1.20 compliant
- Optimized for Martin fixture firmware upload
- Universal power supply
- PowerCon connectors in/out for easy daisy-chaining
- Rack, truss and wall mountable
- Lightweight yet robust construction
SPECIFICATIONS
|
PHYSICAL
Width: 220 mm (8.7 in.) Height: 45 mm (1.8 in.) Depth: 125 mm (5.0 in.) Weight: 0.9 kg (2.0 lbs.) DATA SIGNAL DMX: ANSI E1.11 (USITT DMX 512-A) RDM : ANSI E1.20 Electrical standard: EIA-485 Recommended cable type: STP (Shielded Twisted Pair) Recommended cable gauge: 22 or 24 AWG CONSTRUCTION Housing: Aluminum Finish: Electrostatic powder-coated CONNECTIONS Data input: 5-pin XLR male Data throughput (not amplified or branched): 5-pin XLR female Data outputs (optically isolated and amplified): 5 x 5-pin XLR female AC power input: Neutrik PowerCon AC power throughput: Neutrik PowerCon ELECTRICAL AC power: 100-240 V nominal, 50/60 Hz Typical power consumption: 4 W Power supply unit: Auto-ranging electronic switch-mode Power consumption figures are typical, not maximum. Allow for +/-10% variation. |
THERMAL
Maximum ambient temperature (Ta max.): 55° C Minimum ambient temperature (Ta min.): -30° C APPROVALS EU safety: EN 60950-1 EU EMC: EN 55022, EN 55024, EN 55103-1, EN 55103-2 US safety: UL 508 US EMC: FCC Part 15 Class A Canadian safety: CAN/CSA C22.2 No. 14 Canadian EMC: ICES-003 Class A Australia/NZ: C-TICK N4241 INCLUDED ITEMS 4 x screws to join two devices for rack mounting 2 x L-brackets + 8 x screws for 19-inch rack mounting two Splitters (1U) or surface mounting Neutrik PowerCon NAC3FCA male input connector ACCESSORIES Power connectors:Power Connector PowerCON Male: P/N 91611795 Power Connector PowerCON Female : P/N 91611794 Cables, 16 A, for connection to power in chains:Power relay cable 3 x 2.5 mm2, H07RN-F POWCON-POWCON 1.2 m (3.9 ft.): P/N 91611798 Power relay cable 3 x 14 AWG, SJOOW POWCON-POWCON 1.2m (3.9 ft.): P/N 91610175 Power relay cable 3 x 2.5 mm2, H07RN-F POWCON-POWCON 2.5m (8.2 ft.): P/N 91611799 Power relay cable 3 x 14 AWG, SJOOW POWCON-POWCON 2.5m (8.2 ft.): P/N 91610176 (H07RN-F are European approved cables, SJOOW are US approved cables) Cables, 16 A, for power input:Power input cable 3 x 2.5 mm2, H07RN-F OPEN-POWCON 1.5 m (4.9 ft.): P/N 91611800 Power input cable 3 x 14 AWG, SJOOW OPEN-POWCON 1.5 m (4.9 ft.): P/N 91610177 Power input cable 3 x 2.5 mm2, H07RN-F OPEN-POWCON 5.0 m (16.4 ft.): P/N 91611801 Power input cable 3 x 14 AWG, SJOOW OPEN-POWCON 5.0 m (16.4 ft.): P/N 91610178 Installation hardware:Half-coupler clamp: P/N 91602005 G-clamp:P/N 91602003 Quick-trigger clamp: P/N 91602007 Safety Cable, SWL 60 kg, BGV C1 / DGUV 17, black: P/N 91604006 Safety Cable, SWL 60 kg, BGV C1 / DGUV 17, silver: P/N 91604007 RELATED ITEMS Martin™ DMX 5.3 Splitter: P/N 90758140 ORDERING INFORMATION Martin RDM 5.5 Splitter™: P/N 90758150 |