CONTACT FOR PRICING
|
The MAC Allure™ Profile features a novel RGBW light engine with unique 7-segmented beam control. With instant color control and pixelated beam, the MAC Allure Profile enables dynamic projection and mid-air effects, previously not possible. The proprietary light engine sets new standards in compactness and efficiency, previously associated with larger, costlier fixtures. To ease programming and content creation, this is also the first lighting fixture to incorporate Martin's P3 control. The pixelated beam can still be controlled or pixel-mapped via DMX and Art-Net protocols, however, switching or cross-fading to P3 or vice versa is now instantly possible. Designed to support rental and install clients, the MAC Allure Profile is ideal for concert/touring, TV, corporate, houses of worship, concert venues, nightclubs, and cruise ships.
|
FEATURES
- First pixelated spot with light and color engine divided into seven full color pixels
- Truly sustainable workhorse moving head
- Integrated Martin P3 visual control as well as DMX, Art-Net and sACN incorporated onboard
- Built for pixel mapping with an all solid state color mixing system, instant color and intensity response, and seven pixel beam technology
- High and precise refresh rates ensure no flicker or banding on any broadcast application
- Color calibrated system excels on subtle pastels and white tones to ensure consistent colors across fixtures
- Boasts an extremely compact footprint in spite of its powerful performance features
SPECIFICATIONS
PHYSICAL
Length: 385 mm (15.2 in.) Width: 410 mm (16.2 in.) across yoke Height: 609 mm (24.0 in.) maximum 603 mm (23.8 in.) head straight up Weight: 17.6 kg (38.8 lbs.) Minimum center-to-center distance in side-by-side installation: 510 mm (20.1 in.) DYNAMIC EFFECTS Pre-programmed effects: Two ranges of FX, independent or synchronized/combined Color mixing: RGB(W), independently variable 0 - 100% Color temperature control: Variable 2000 - 8000 K Color wheel: Virtual, multiple colors, split colors and open, indexing, continuous rotation, random color Rotating gobo wheel: 6 x interchangeable texture/breakup gobos + open, indexing, continuous rotation and shake Iris: Variable 0 - 100% including pulse effects Zoom: Motorized Focus: Range varies with zoom angle, from approx. 2 m (6.6 ft.) / 6 m (19.7 ft.) to infinity Prism: 4 facet, fully indexed Dimmer/shutter: 0 - 100% continuous electronic dimming, regular and random strobe and pulse effects, instant open and blackout Dimming options: Choice of four dimming curves Pan: 540° Tilt: 268° Position correction system: Absolute position monitoring CONTROL AND PROGRAMMING 16-bit control: Dimming, color, rotating gobos, zoom, focus, pan and tilt Setting and addressing: Control panel with backlit graphic display and 4 buttons or via DMX DMX channels: 32/68 Fixture Identification: User-settable ID number DMX compliance: USITT DMX512-A RDM compliance: ANSI/ESTA E1.20 Transceiver: Opto-isolated RS-485 Fixture software update: USB memory device or over DMX link OPTICS Zoom range: 12° - 36° one-tenth peak (1:3)Light source: 7 x 60W RGBW LEDs Total LED engine power: ~420 W Minimum LED lifetime: 50,000 hours (to >80% luminous output)* *Figure obtained under manufacturer's test conditions PHOTOMETRIC DATA Light engine luminous output: 14,000 lumens Fixture luminous output: 6500 lumens Calibrated default white: 6500 KCRI (Color Rendering Index) : >80 CQS (Color Quality Scale): 88TM-30 Rf (IES TM-30-15 Fidelity Index): 82 TM-30 Rg (IES TM-30-15 Gamut Index): 109 TLCI (Television Lighting Consistency Index): 82 CONSTRUCTION Housing: High-impact flame-retardant thermo-plastic Color: Black (white housing option available, made to order) Protection rating: IP20 INSTALLATION Mounting Parts: 2 pairs of 1/4-turn locks Location: Dry location only, must be fastened to surface or structure Orientation: Any Minimum distance to combustible materials: 0.2 m (8 in.) Minimum distance to illuminated surfaces: 1.0 m (3.3 ft.) CONNECTIONS AC power input/output: Neutrik TRUE1 socket (accepts Neutrik TRUE1 NAC3FX-W connector or NAC3FX-M connector) DMX and RDM data in/out: 5-pin locking XLR Ethernet data: Neutrik EtherCon in/out ELECTRICAL AC power: 120-240 V nominal, 50/60 Hz Power supply unit: Auto-ranging electronic switch-mode Power Consumption: 73 W (all effects static, zero light output) Half-cycle RMS inrush current at 230 V, 50 Hz: 16.6 A TYPICAL POWER AND CURRENT Typical power data, extended color mode, all LEDs at 100% intensity: 100 V, 60 Hz: 4.8 A, 480 W, PF 0.99 120 V, 60 Hz: 4.0 A, 480 W, PF 0.99 208 V, 60 Hz: 2.4 A, 480 W, PF 0.97 230 V, 50 Hz: 2.1 A, 480 W, PF 0.97 240 V, 50 Hz: 2.0 A, 480 W, PF 0.97 Typical power data, calibrated mode, full intensity at 6500 K: 100 V, 60 Hz: 3.7 A, 370 W, PF 0.99 120 V, 60 Hz: 3.1 A, 370 W, PF 0.99 208 V, 60 Hz: 1.9 A, 370 W, PF 0.96 230 V, 50 Hz: 1.7 A, 370 W, PF 0.96 240 V, 50 Hz: 1.6 A, 370 W, PF 0.95 Figures are typical, not maximum. Measurements made at nominal voltage with all LEDs at full intensity. Allow for a deviation of +/- 10%. PF = power factor |
THERMAL
Cooling: Combined convection and forced air (temperature-regulated, low noise, user-definable levels) Maximum surface temperature, steady state, Ta=40° C: 75° C (167° F) Maximum ambient temperature (Ta max.): 40° C (104° F) Minimum ambient temperature (Ta min.): 5° C (41° F) Total heat dissipation (calculated, +/- 10%): 2000 BTU/hr. APPROVALS EU safety: EN 60598-2-17, EN 62471, EN62493 EU EMC: EN 55015, EN 55032, EN 55103-2, EN 61000-3-2, EN 61000-3-3, EN 61547 US safety: UL 1573 US EMC: FCC Part 15 Class B Canadian safety: CSA C22.2 No. E598-2-17 Canadian EMC: CAN ICES-003(B)/NMB-003(B); CAN ICES-005 (B) / NMB-005 (B) Australia/NZ: RCM Global CB Certification/IECEE: IEC 60598-2-17 (IEC 60598-1) INCLUDED ITEMS Two omega brackets with 1/4 turn fasteners for rigging clamp attachment ACCESSORIES SIP Packaging MAC Allure™: P/N 91611860 Three-unit flight case for MAC Allure™: P/N 91515052 Cables, 16 A, for connection to power in chains: Power input cable, H07RN-F, 2.5 mm2, 14 AWG, bare ends to Neutrik TRUE1 NAC3FX-W (female), 1.5 m (4.9 ft.): P/N 91611797 Power input cable, H07RN-F, 2.5 mm2, 14 AWG, bare ends to Neutrik TRUE1 NAC3FX-W (female), 5 m (16.4 ft.): P/N 91611786 Power input cable, SJOOW, 12 AWG, bare ends to Neutrik TRUE1 NAC3FX-W (female), 1.5 m (4.9 ft.): P/N 91610173 Power input cable, SJOOW, 12 AWG, bare ends to Neutrik TRUE1 NAC3FX-W (female), 5 m (16.4 ft.): P/N 91610174 Cables, 16 A, for relaying power in chains: Power relay cable, H07RN-F, 2.5 mm2, TRUE1 to TRUE1, 0.45 m (1.5 ft.): P/N 91611784 Power relay cable, H07RN-F, 2.5 mm2, TRUE1 to TRUE1, 1.2 m (3.9 ft.): P/N 91611785 Power relay cable, H07RN-F, 2.5 mm2, TRUE1 to TRUE1, 2.5 m (8.2 ft.): P/N 91611796 Power relay cable, SJOOW, 12 AWG, TRUE1 to TRUE1, 0.45 m (1.5 ft.): P/N 91610170 Power relay cable, SJOOW, 12 AWG, TRUE1 to TRUE1, 1.2 m (3.9 ft.): P/N 91610171 Power relay cable, SJOOW, 12 AWG, TRUE1 to TRUE1, 2.5 m (8.2 ft.): P/N 91610172 Cable Connector, Neutrik PowerCON TRUE1 NAC3FX-W (female): P/N 91611789 Connectors: Power connector, cable mount, Neutrik TRUE1 NAC3FX-W (female): P/N 91611789 Power connector, cable mount, Neutrik TRUE1 NAC3MX-W (male): P/N 91611788 (*Please order SIP variant fixtures to obtain the required SIP foam flight case inserts )Installation hardware: G-clamp (suspension with fixture hanging vertically downwards only): P/N 91602003 Quick Trigger Clamp (suspension with fixture hanging vertically downwards only): P/N 91602007 Half-coupler Clamp: P/N 91602005 Safety Cable, SWL 60 kg, BGV C1 / DGUV 17, black: P/N 91604006 Safety Cable, SWL 60 kg, BGV C1 / DGUV 17, silver: P/N 91604007 RELATED ITEMS Martin™ RDM 5.5 Splitter: P/N 90758150 Martin Companion Cable: P/N 91616091 Martin Companion Software Suiter (including firmware uploader) Free download from www.martin.com ORDERING INFORMATION Models: MAC Allure™ Profile EPS (in cardboard box, polystyrene packaging): P/N 90250005HU MAC Allure™ Profile SIP (in cardboard box with SIP foam flight case insert): P/N 90250010HU MAC Allure™ Profile, white finish, EPS (in cardboard box, polystyrene packaging): P/N 90250000HU |