FLOH LIGHTING
  • BRANDS
    • Chauvet Pro >
      • EFFECTS
      • ELLIPSOIDAL
      • HOUSE LIGHTS
      • PIXEL MAPPING
      • MOVING HEADS
      • BLINDERS & STROBES
      • NETWORKING HARDWARE
    • Chauvet video >
      • Indoor Video
      • Outdoor Video
      • Video Accessories
    • Martin Lighting >
      • Effect Lights
      • Moving Heads
      • ATMOSPHERIC EFFECTS
      • Static
      • Architectural / Exterior
      • Martin Accessories
    • MADRIX >
      • Software / License Keys
      • Hardware
    • More Brands
  • RENTALS
  • LED Lighting
    • LED Strip
    • Aluminum Profiles
    • Controllers
    • Receivers
    • Smart Lights
    • Power Supplies
  • PORTFOLIO
  • Installations
CONTACT FOR PRICING
PHONE
EMAIL
Picture

EXTERIOR WASH 200

Exterior™ Wash 200 is a powerful, compact and energy-efficient LED lighting fixture designed to illuminate mid-sized structures and building facades. A discreet, optional snoot integrates seamlessly with the slick design of the fixtures. It has built-in display for ease-of-use, a wide selection of beam angles and is fully IP-rated for permanent outdoor use.
The Exterior Wash 200 is designed for narrow beam applications and is based on separate LEDs for red, green, blue and white
Learn more about our product verification and reliability
  • Narrow beam configuration with 6 beam angle options
  • Functional and discreet optional snoot which integrates with the design of the fixtures
  • Control via DMX, RDM and OLED display

FEATURES

  • Powerful single color R,G,B,W LEDs
  • Up to 6500 lumens at full white (RGBW)
  • Six different beam angle options
  • Internal power and control (DMX, RDM and OLED display)
  • Rugged IP66 housing
  • 0–100% intensity control

SPECIFICATIONS

PHYSICAL
Length: 270 mm (10.7 in.)
Width: 334 mm (13.2 in.)
Height: 382 mm (15.1 in.)
Weight: 13.0 kg (28.7 lbs.)

DYNAMIC EFFECTS
Color mixing: RGBW
Intensity: 0 - 100%

CONTROL AND PROGRAMMING
Control systems: DMX, RDM
Setting, addressing, standalone programming: Control panel with OLED display
DMX channels: 3-5 depending on DMX mode
Receiver: RS-485
DMX compliance: USITT DMX512-A
RDM compliance: ANSI/ESTA E1.20
Firmware update: Serial upload via DMX link

OPTICS
Light source: 16 x R, 18 x G, 16 x B, 18 x W single-color LEDs
Minimum LED lifetime: 50,000 hours (to >70% luminous output)*
LED manufacturer: Cree
Beam Angle Options:
No diffuser: 7.5°
Narrow diffuser: 11.5°
Medium diffuser: 25°
Wide diffuser: 36°
Very wide diffuser: 60°
Asymmetric diffuser: 59° x 14.5°


*Figure obtained under manufacturer's test conditions

PHOTOMETRIC DATA
CRI (Color Rendering Index) : > 70
CCT: 6500 K (White LED)
Total luminous output: 6500 lumens

CONSTRUCTION
Housing: Cast aluminum
Color: Light grey (white, black or other colors available on request)
Ingress protection rating: IP66
Surface treatment: Anodized and electrostatic powder-coated
Effective Projected Area (EPA): 0.1 m² including snoot
Impact resistance: IK08 (with control panel display cover plate installed)
Corrosion resistance: C5-M (very high corrosivity / marine, ISO 12944)
Vibration resistance: 1.0g, Sinusoidal (IEC 60068-2-6)
0,7g RMS Random (IEC 60068-2-64)

RoHS compliant

INSTALLATION
Mounting: Adjustable yoke
Orientation: Any
Minimum distance to illuminated surfaces: 0.2 m (0.6 ft.)

CONNECTIONS
Power connection: 1.8 m (5.9 ft.) cable tail without connector
Power input cable type, EU models: H05RN-F 300/500V, 3 x 0.75 mm2, Ø 7 mm
Power input cable type, US models: SJOW 18AWG, 300V, WL F1, Ø 8 mm
Data connection: 1.8 m (5.9 ft.) open ended 5-conductor combined input + output cable tail
​
All cable entries: IP68 cable gland

​
ELECTRICAL
AC power: 100 - 240 / 277 V nominal, 50/60 Hz
Power supply unit: Integrated, auto-sensing multi-voltage
Power Consumption: 3 W (steady state, all LEDs at zero intensity)
Typical half-cycle RMS inrush current: 10.3 A
Surge protection: 4 KV
Maximum total power consumption: 185 W

TYPICAL POWER AND CURRENT
100 V, 60 Hz: 1.6 A, 160 W, PF 0.99120 V, 60 Hz: 1.35 A, 160 W, PF 0.99230 V, 50 Hz: 0.75 A, 160 W, PF 0.94277 V, 60 Hz: 0.65 A, 160 W, PF 0.89
Measurements made with fixture in steady state at nominal voltage, ambient temperature (Ta) 20° C (68° F), all LEDs at full intensity. Allow for a deviation of +/- 10%.

THERMAL
Cooling: Convection
Maximum ambient temperature (Ta max.): 45° C (113° F)*
Minimum ambient temperature (Ta min.): -30° C (-22° F)**
Maximum surface temperature, steady state, at 40° C ambient: 55° C (131° F)
Total heat dissipation (calculated, +/- 10%): 485 BTU/hr
*Above this temperature, the fixture regulates output to protect from overheating
**Power must be maintained below -20° C (-4° F)


APPROVALS
EU safety: EN60598-2-5 (EN60598-1), EN62471, EN62493, EN60598-2-1EU EMC: EN55015, EN61547, EN61000-3-2, EN6100-3-3, EN61000-4-2, EN6100-4-4, EN6100-4-5
US safety: ANSI/UL 1598
US EMC: 47 CFR Part 15 Class A
Canadian safety: CSA C.22.2 No. 250
Australia/NZ: RCM

INCLUDED ITEMS
Cover plate for control panel

ACCESSORIES
Exterior Wash 200 Series, narrow diffuser kit: P/N 91610154
Exterior Wash 200 Series, medium diffuser kit: P/N 91610153
Exterior Wash 200 Series, wide diffuser kit: P/N 91610152
Exterior Wash 200 Series, very wide diffuser kit: P/N 91610151
Exterior Wash 200 Series, asymmetric diffuser kit: P/N 91610150
Exterior Wash 200 Series, glare shield / snoot: P/N 91611745
Exterior Wash 200 Honeycomb Louvre: P/N 91611857

RELATED ITEMS
Martin Companion Cable: P/N 91616091

ORDERING INFORMATION
Exterior Wash 200, 7°, EU, aluminum: P/N 90509087
​
Exterior Wash 200, 7°, US, aluminum: P/N 90509090

DOWNLOADS

Exterior Wash 200 Series - User Manual
Design. Install. Maintain.
​
About Us
Trades Program
Privacy Policy
​Terms & Conditions
Contact
Address:
​516 Annette St.
Toronto, ON
M6P 1S3

Phone: 416-792-5588
​Email: info@flohentertainment.com 
  • BRANDS
    • Chauvet Pro >
      • EFFECTS
      • ELLIPSOIDAL
      • HOUSE LIGHTS
      • PIXEL MAPPING
      • MOVING HEADS
      • BLINDERS & STROBES
      • NETWORKING HARDWARE
    • Chauvet video >
      • Indoor Video
      • Outdoor Video
      • Video Accessories
    • Martin Lighting >
      • Effect Lights
      • Moving Heads
      • ATMOSPHERIC EFFECTS
      • Static
      • Architectural / Exterior
      • Martin Accessories
    • MADRIX >
      • Software / License Keys
      • Hardware
    • More Brands
  • RENTALS
  • LED Lighting
    • LED Strip
    • Aluminum Profiles
    • Controllers
    • Receivers
    • Smart Lights
    • Power Supplies
  • PORTFOLIO
  • Installations