FLOH LIGHTING
  • RENTALS
  • BRANDS
    • Chauvet Pro >
      • EFFECTS
      • ELLIPSOIDAL
      • HOUSE LIGHTS
      • PIXEL MAPPING
      • MOVING HEADS
      • BLINDERS & STROBES
      • NETWORKING HARDWARE
    • Chauvet video >
      • Indoor Video
      • Outdoor Video
      • Video Accessories
    • Martin Lighting >
      • Effect Lights
      • Moving Heads
      • ATMOSPHERIC EFFECTS
      • Static
      • Architectural / Exterior
      • Martin Accessories
    • MADRIX >
      • Software / License Keys
      • Hardware
    • More Brands
  • PORTFOLIO
CONTACT FOR PRICING
PHONE
EMAIL
Picture

EXTERIOR PROJECTION 500

The Exterior™ Projection 500 is a powerful fixture for integrating textures, patterns and graphics in outdoor lighting designs. The fixture can be used for bright and dynamic logo projection as well as precision framing.
Using advanced LED technology, it offers outstanding energy efficiency, compact size and unlimited creative possibilities.
Creating custom gobos for building facades
Learn more about our product verification and reliability
  • Flat-field, high-contrast image projection 
  • Fully weatherized for trouble-free use with minimal maintenance in outdoor installations
  • Packed with features, allowing huge creativity in setting up exciting lighting effects

FEATURES

  • Up to 6100 lumens output with 4 beam angles variants from narrow to wide
  • Powerful close-range and long-range projection
  • Flat-field, high-contrast image projection based on high-power LED engine
  • 4 layers of versatile dynamic effects (colors, gobo projection, gobo animation, prisms/frost)
  • Crisp image projection
  • Rugged IP66-rated housing
  • Minimal maintenance – low total cost of ownership

SPECIFICATIONS
PHYSICAL
Length: 415 mm (16.4 in.)
Width: 293 mm (11.6 in.)
Height: 444 mm (17.5 in.)
Weight: 17.5 kg (38.6 lbs.)
All figures include mounting yoke

DYNAMIC EFFECTS
Color wheel: 8 interchangeable colors + open
Gobo wheel: 6 rotating gobos plus open, indexing, variable rotation
Gobo animation: Variable speed linear animation effect
Focus: Motorized, variable 3 m (9.8 ft.) to infinity
Prism: Prism wheel with 2 interchangeable prisms, prism rotation and indexing
Frost (wash effect): Motorized variable
Dimming: Electronic, constantly variable 0-100%, 16-bit control
Shutter: Strobe and pulse effects, instant open and blackout

CONTROL AND PROGRAMMING
Control options: DMX, RDM, standalone
Control resolution: 8-bit DMX control of each color
Configuration, addressing and status: Onboard control panel with OLED display
DMX channels: 13
DMX compliance: USITT DMX512-A
RDM compliance: ANSI/ESTA E1.20

OPTICS
Light source: 230 W white light LED engineCRI (Color Rendering Index): 72
Color temperature: 8300 K
LED lifetime: 20,000 hours (to >70% luminous output)*
LED manufacturer: Prolight Opto
*Figure obtained under manufacturer's test conditions

PHOTOMETRIC DATA
Narrow:
Cut-off angle: 12°
Total output: 5000 lumens
Center peak: 203,000 cd

Medium:
Cut-off angle: 22°
Total output: 6100 lumens
Center peak: 77,000 cd

Wide:
Cut-off angle: 37°
Total output: 5700 lumens
Center peak: 28,000 cd

Very Wide:
Cut-off angle: 50°
Total output: 3400 lumens
Center peak: 11,000 cd


CONSTRUCTION
Housing: Cast aluminum
Finish: Hard anodized, metallic grey lacquered
Front glass: 5 mm (0.2 in.) anti-reflection coated tempered glassIngress protection: IP66
Impact resistance: IK08 (with control panel display cover plate installed)
Corrosion resistance: C5-M (very high corrosivity / marine, ISO 12944)
Vibration resistance: 1.0g, Sinusoidal (IEC 60068-2-6)
0,7g RMS Random (IEC 60068-2-64)
EPA (Effective Projected Area): 0.15 m2
RoHS compliant

GOBOS
Suitable material: Borosilicate glass, coatings heat-resistant to 450°C (842° F)
Alternative material: Aluminum 1060, paint on front lens side, 450° C (842° F)
Gobo diameter: 30.0 mm +0/-0.3 mm (1.2 in. +0/-0.02 in.)
Maximum image diameter: 23 mm (0.91 in.)
Glass gobo thickness, minimum: 1.1 mm ±0.1 mm (0.045 ±0.004 in.)
Glass gobo thickness, maximum: 3.0 mm ±0.3 mm (0.12in. ± 0.012 in.)
Aluminum gobo thickness: 0.5 mm ± 0.02 mm (0.020 in. ± 001 in.)
HT paint

INSTALLATION
Mounting: Adjustable yoke
Location: Suitable for wet locations. Do not immerse in water.
Orientation: Any (sides must be kept vertical)
​
Minimum distance to illuminated surfaces: 0.5 m (20 in.)
CONNECTIONS
​
Power cable entry: IP68 cable glandPower connection: 1.8 m (5.9 ft.) cable tail with bare ends
Data cable entry: IP68 cable gland
Data connection: 1.8 m (5.9 ft.) combined input + output cable tail with bare ends

ELECTRICAL
AC power: 100-240/277 V nominal, 50/60 Hz
Power Supply: Auto-ranging electronic switch-mode
Typical half-cycle RMS inrush current: 8.4 A
Surge protection: 4 KV
Idle power (zero intensity, no effects applied): 32 W, 0.3 A

TYPICAL POWER AND CURRENT
110 V, 60 Hz: 320 W, 2.9 A, PF 0.977
230 V, 50 Hz: 310 W, 1.4 A, PF 0.971
277 V, 60 Hz: 305 W, 1.2 A, PF 0.950
Figures are typical, not maximum. Measurements made at nominal voltage with all LEDs at full intensity. Allow for a deviation of +/- 10%.

THERMAL
Cooling: Convection, internal forced air
Total heat dissipation (calculated): 1100 BTU/hr.
Maximum surface temperature: 85° C (185° F)
Maximum ambient temperature (Ta max.): 45° C (113° F)
*
Minimum ambient temperature (Ta min.): -30° C (-22° F)**
*Above this temperature, the fixture regulates output to protect from overheating.
**For instant wake-up with no warm-up mode, leave power applied constantly in ambient temperatures below 0° C (32° F)


APPROVALS
EU safety: EN 60598-2-1, EN 60598-2-5 (EN 60598-1), EN 62471, EN 62493
EU EMC: EN 55015, EN 55032, EN 55103-2, EN 61000-3-2, EN 61000-3-3, EN 61000-4-2, EN 61000-4-3, EN 61000-4-4, EN 61547
US safety: ANSI/UL 1598
US EMC: CFR 47 Part 15 Class A
Canadian safety: CSA C22.2 No 250.0
Australia/NZ: RCM
Global CB Certification/IECEE: IEC 60598-2-5 (IEC 60598-1)

ACCESSORIES
Glare Shield, Exterior Projection 500, aluminum: P/N 91611767
Projection Setup Gobo: P/N 91616068
EP-500, Manual Framing Module: P/N 91611842
Ring for gobo, OD30, set of 10 pcs: P/N MAR-91611851

RELATED ITEMS
Martin™ RDM 5.5 Splitter: P/N 90758150Martin Companion Cable: P/N 91616091Martin Companion Software Suite (including firmware uploader)

SPARE PARTS
Silica gel desiccant bag in sealed foil pack: P/N 37220000
Goboholder with magnet incl. washer, short spring & long spring: P/N 50481990
Goboholder without magnet incl. washer, short spring & long spring: P/N 50481992

ORDERING INFORMATION
EU models:
Exterior Projection 500, Narrow, EU, Aluminum: P/N 90506500
Exterior Projection 500, Medium, EU, Aluminum: P/N 90506505
Exterior Projection 500, Wide, EU, Aluminum: P/N 90506510
Exterior Projection 500, Very Wide, EU, Aluminum: P/N 90506535
Exterior Projection 500, Narrow, EU, White: P/N 90506540
Exterior Projection 500, Medium, EU, White: P/N 90506545
Exterior Projection 500, Wide, EU, White: P/N 90506550
Exterior Projection 500, Very Wide, EU, White: P/N 90506555

US Models:
​
Exterior Projection 500, Narrow, US, Aluminum: P/N 90506515
Exterior Projection 500, Medium, US, Aluminum: P/N 90506520
Exterior Projection 500, Wide, US, Aluminum: P/N 90506525
Exterior Projection 500, Very Wide, US, Aluminum: P/N 90506530

DOWNLOADS

Exterior Projection 500 Spec Sheet
Exterior Projection System Diagrams
Exterior Projection 500 - User Manual
Design. Install. Maintain.
​
About Us
Trades Program
Privacy Policy
​Terms & Conditions
Contact
Address:
​516 Annette St.
Toronto, ON
M6P 1S3

Phone: 416-792-5588
​Email: [email protected] 
  • RENTALS
  • BRANDS
    • Chauvet Pro >
      • EFFECTS
      • ELLIPSOIDAL
      • HOUSE LIGHTS
      • PIXEL MAPPING
      • MOVING HEADS
      • BLINDERS & STROBES
      • NETWORKING HARDWARE
    • Chauvet video >
      • Indoor Video
      • Outdoor Video
      • Video Accessories
    • Martin Lighting >
      • Effect Lights
      • Moving Heads
      • ATMOSPHERIC EFFECTS
      • Static
      • Architectural / Exterior
      • Martin Accessories
    • MADRIX >
      • Software / License Keys
      • Hardware
    • More Brands
  • PORTFOLIO