|
CONTACT FOR PRICING
|
The Exterior™ Projection 1000 is an unparalleled, powerful tool for permanent outdoor installations to integrate textures, patterns and graphics for limitless creative exterior lighting designs.
Sporting high impact and low maintenance, this advanced, IP66-rated LED projector offers sharp image quality, dynamic features and great reach over huge distances. Creating custom gobos for building facades Learn more about our product verification and reliability
|
FEATURES
- Flat field, high contrast image projection based on high power LED engine
- 0-100% electronic dimming
- Full CMY color mixing + additional color wheel with 7 interchangeable colors
- 7 gobo slots for projecting graphic images (gobos included)
- Animation system for creating animated lighting effects (horizontal and vertical)
- Zoom range from 10° - 44° for exact projection on desired surface
- Variable frost for creating morphing effects and hybrid function as wash light
- 2 rotating prisms for creating abstract multi patterns
- Intuitive setup, configuration and stand-alone programming via graphical OLED display
- RDM and DMX control
- Fully weatherized IP66 fixture for permanent outdoor installation
- Fully convection cooling using heat pipes technology
SPECIFICATIONS
|
PHYSICAL
Length: 702 mm (27.7 in.) Width: 417 mm (16.5 in.) Height: 618 mm (24.4 in.) Weight: 50 kg (110 lbs.) All figures include mounting yoke DYNAMIC EFFECTS Color mixing: CMY, independently variable 0 - 100% Color wheel: 7 interchangeable colors + open Gobo wheel: 7 rotating gobos plus open, indexing, variable rotation Gobo animation wheel: Indexing, continuous rotation with variable angle, speed and direction Zoom: 10° - 44° (cut-off angles) Focus: Motorized, variable 3 m (9.8 ft.) to infinity Prism: Prism wheel with 2 interchangeable prisms, prism rotation and indexing Frost filter: Motorized, variable Dimming: Electronic, constantly variable 0-100%, 16-bit control Shutter: Electronic, strobe and pulse effects, instant open and blackout CONTROL AND PROGRAMMING Control options: DMX, RDM, standalone Configuration, addressing and status: Onboard control panel with OLED display or via RDM 8-bit control: CMY, color selection, gobo selection, prism, frost, animation 16-bit control: Gobo indexing and rotation, zoom, focus and intensity DMX channels: 20 DMX compliance: USITT DMX512-A RDM compliance: ANSI/ESTA E1.20 OPTICS Light source: 440 W white light LED engine CRI (Color Rendering Index): 72' Color temperature: 6500 K (±250 K) LED lifetime: 20,000 hours (to >70% luminous output)* LED manufacturer: Appotronics *Figure obtained under manufacturer's test conditions PHOTOMETRIC DATA Cut-off angle: 10° - 44° Luminous intensity: At 10° zoom: 11,500 lumens At 16° zoom: 15,000 lumens At 40° zoom: 16,800 lumens Center Peak: At 10° zoom: 731,000 cd At 16° zoom: 311,000 cd At 40° zoom: 42,000 cd CONSTRUCTION Housing: Cast aluminum Finish: Hard anodized, white or metallic grey lacquered Front glass: 5 mm (0.2 in.) anti-reflection coated tempered glass Ingress protection: IP66Impact resistance: IK08 (with control panel display cover plate installed) Corrosion resistance: C5-M (very high corrosivity / marine, ISO 12944) Vibration resistance: 1.0g, Sinusoidal (IEC 60068-2-6) 0,7g RMS Random (IEC 60068-2-64)' EPA (Effective Projected Area): 0.28m² GOBOS Suitable material: Metal or borosilicate glass, coatings heat-resistant to 450°C (842° F) Gobo diameter: 30.0 mm +0/-0.3 mm (1.2 in. +0/-0.02 in.)Maximum image diameter: 26 mm (1.02 in.) Gobo thickness, minimum: 1.1 mm ±0.1 mm (0.045 ±0.004 in.) Gobo thickness, maximum: 3.0 mm ±0.3 mm (0.118 in. ± 0.012 in.)* *Gobos thicker than 2.5 mm require a shorter spring in the goboholder INSTALLATION Mounting: Adjustable yoke Location: Suitable for wet locations. Do not immerse in water. Orientation: Any (sides must be kept vertical) Minimum distance to illuminated surfaces: 0.5 m (20 in.) |
CONNECTIONS
Power cable entry: IP66 cable gland Power connection: 1.8 m (5.9 ft.) cable tail with bare ends Power cable type: EU models: H07RN-F 450/700V, Ø10 mm US models: SJTW 14AWG, 300V, Ø9.3 mm Data cable entry: IP66 cable glandData connection: 1.8 m (5.9 ft.) combined input + output cable tail with bare ends ELECTRICAL AC power: 100-120/200-277 V nominal, 50/60 Hz Power Supply: Auto-ranging electronic switch-mode Typical half-cycle RMS inrush current: 15.5 A Surge protection: 4 KV Idle power (zero intensity, no effects applied): 75 W TYPICAL POWER AND CURRENT 120 V, 60 Hz: 645 W, 5.5 A, PF 0.98 230 V, 50 Hz: 635 W, 2.9 A, PF 0.95 277 V, 60 Hz: 635 W, 2.6 A, PF 0.90 Figures are typical, not maximum. Measurements made at nominal voltage with all LEDs at full intensity. Allow for a deviation of +/- 10%. THERMAL Cooling: Convection, internal forced air Total heat dissipation (calculated): 2350 BTU/hr.Maximum surface temperature: 85° C (185 ° F) Maximum ambient temperature (Ta max.): 45° C (113° F)* Minimum ambient temperature (Ta min.): -30° C (-22° F)** *Above this temperature, the fixture regulates output to protect from overheating. **For instant wake-up with no warm-up mode, leave power applied constantly in ambient temperatures below 0° C (32° F). APPROVALS EU safety: EN 60598-2-1, EN 60598-2-5 (EN 60598-1), EN 62471, EN 62493 EU EMC: EN 55015, EN 55032, EN 55103-2, EN 61000-3-2, EN 61000-3-3, EN 61000-4-2, EN 61000-4-3, EN 61000-4-4, EN 61547 US safety: ANSI/UL 1598 US EMC: CFR 47 Part 15 Class A Canadian safety: CSA C22.2 No 250.0 Australia/NZ: RCM Global CB Certification/IECEE: IEC 60598-2-5 (IEC 60598-1) INCLUDED ITEMS Silica gel desiccant bag: P/N 37220000 Two gobo retaining springs ACCESSORIES Glare Shield, Exterior Projection 1000: P/N 91611768 Projection Setup Gobo, Exterior Projection 1000: P/N 91616075 Ring for gobo, OD30, set of 10 pcs: P/N MAR-91611851 RELATED ITEMS Martin™ RDM 5.5 Splitter: P/N 90758150 Martin Companion Cable:P/N 91616091 Martin Companion Software Suite (including firmware uploader) SPARE PARTS Silica gel desiccant bag in sealed foil pack: P/N 37220000 Goboholder for EP1000 with magnet incl. washer & short spring: P/N 50482185 Goboholder for EP1000 with magnet incl. washer & long spring: P/N 50482186 ORDERING INFORMATION EU models: Exterior Projection 1000, EU, Aluminum: P/N 90512000 Exterior Projection 1000, EU, White: P/N 90512015 US Models: Exterior Projection 1000, US, Aluminum: P/N 90512005 Exterior Projection 1000, US, White: P/N 90512010 |