FLOH LIGHTING
  • BRANDS
    • Chauvet Pro >
      • EFFECTS
      • ELLIPSOIDAL
      • HOUSE LIGHTS
      • PIXEL MAPPING
      • MOVING HEADS
      • BLINDERS & STROBES
      • NETWORKING HARDWARE
    • Chauvet video >
      • Indoor Video
      • Outdoor Video
      • Video Accessories
    • Martin Lighting >
      • Effect Lights
      • Moving Heads
      • ATMOSPHERIC EFFECTS
      • Static
      • Architectural / Exterior
      • Martin Accessories
    • MADRIX >
      • Software / License Keys
      • Hardware
    • More Brands
  • RENTALS
  • LED Lighting
    • LED Strip
    • Aluminum Profiles
    • Controllers
    • Receivers
    • Smart Lights
    • Power Supplies
  • PORTFOLIO
CONTACT FOR PRICING
PHONE
EMAIL
Picture

ERA 400 PERFORMANCE WRM

Designed to fulfill the demand for a bright, compact, tour-worthy moving head, the Martin ERA 400 Performance WRM combines a feature-loaded and rugged, yet cost-efficient profile for entertainment and rental applications. It features a highly efficient 300W warm white LED engine that offers unparalleled 3,200K warm tungsten emulation with a high CRI ideally suited towards small to mid-size theatres and compliments perfectly the Martin ELP range. It produces a sharp image projection with a flat field, includes 1:3 zoom, electronic dimming and strobe, full CMY color mixing and separate color wheel, iris for beam adjustment and fixed and rotating gobo wheels, loaded with user-favorite gobos from the renowned Martin MAC range that include a wide variety of effects, especially when combined with the included rotating prism.

The ERA 400 Performance WRM includes a full curtain framing system which offers lighting designers a high degree of flexibility to achieve precise looks on stage. When fully focused, gobos can be nicely framed with a soft edge, and each of the four framing blades can cross the entire beam independently for a full blackout. The entire system can rotate 90 degrees, allowing designers to direct light exactly where they want it to go and achieve unique movement effects not otherwise possible.
​
Whether being used for small and mid-sized theaters, concert and touring, live TV productions, corporate shows, cruise lines, or houses of worship, the Martin ERA 400 Performance WRM is ideal for a long list of scenarios, requiring a truly versatile LED profile that offers near limitless design and usage potential.

FEATURES

  • Bright 300 watt / 3,200K LED light source
  • 6,000 lumen output
  • Smooth electronic dimming and fast strobe effects
  • Crisp optics with flat field
  • 1:3 Fast zoom
  • CMY color mixing - Vibrant color mixing with a superior palette of colors matching the MAC range
  • 9-slot color wheel –for added color choice and split color effects
  • Full Curtain Framing blades with +/- 45° rotation of entire system for flexible shape generation
  • 7 rotating/indexing gobos – All renowned Martin glass gobos
  • 9 static gobos for great morphing effects
  • Iris – Fast and tight iris
  • 3-facet prism – Real beam separation with rotation and index control for dynamic effects
  • Compact and low weight design

SPECIFICATIONS

PHYSICAL
Length: 379 mm (14.9 in.)
Width: 237 mm (9.3 in.)
Height: 632 mm (24.9 in)
Weight: 22.5 kg (49.6lbs)

DYNAMIC EFFECTS
Electronic shutter effect: Strobe effect, pulse effects, instant open and blackout
Electronic dimming: 0 - 100%, four dimming curve options
Color mixing: CMY, independently variable 0-100%
Color wheel: 9 color filters plus open
Rotating gobo wheel: 7 gobos plus open, wheel rotation, gobo rotation, indexing and shake
Static gobo wheel: 9 gobos plus open, wheel indexing, rotation and shake
Iris: 0-100%
Zoom: Motorized
Focus: Motorized
Framing: Rotatable framing module, +/- 45°, with 4 individually controllable full framing blades with variable angle and position.
Prism: Rotating/indexing three-facet prism
Pan: 540°, coarse & fine control and speed
Tilt: 260°, coarse & fine control and speed

CONTROL AND PROGRAMMING
Control options: DMX
16-bit control: Dimming, pan and tilt
Setting and addressing: Control panel with backlit LCD display
DMX channels: 30
DMX compliance: USITT DMX512/1990
RDM compliance: ANSI/ESTA E1.20
Transceiver: Opto-isolated RS-485

OPTICS
Front lens diameter: 110 mm
Zoom range: 10° - 30°
Light source: 300W LED engine
Minimum LED lifetime: 20000 hours (to >70% luminous output)*
*Manufacturer´s figure obtained under manufacturer´s test conditions

PHOTOMETRIC DATA
Light engine luminous output: 15500 lumens
Fixture luminous output: 6000 lumens
CRI (Color Rendering Index) : >91
CCT: 3200 Kelvin
LED refresh rate : 1200 Hz

CONSTRUCTION
Housing: High-impact flame-retardant thermoplastic
Color: Black
Protection rating: IP 20

GOBOS
Gobo diameter: 26.8 mm +/- 0.2 mm (1.1 in. +/- 0.008 in.)
Maximum image diameter: 19.0 mm (0.75 in.)
Gobo thickness, maximum: 1.1mm borosilicate glass

INSTALLATION
Mounting points: Two quarter-turn brackets for rigging
​Orientation: Any

​
ELECTRICAL
AC power: 100-240V nominal, 50/60 Hz
Power supply unit: Auto-ranging electronic switch mode

TYPICAL POWER AND CURRENT
120 V, 60 Hz: 3.8A, 455W, PF 0.992
230 V, 50 Hz: 1.96A, 442W, PF 0.968
Steady Power Consumption: 44 W, all effects static, zero light output
Half-cycle RMS inrush current: 6 A (at 230 V, 50 Hz)
-: Measurements made at nominal voltage with all LEDs at full intensity. Allow for a deviation of +/- 10%.
PF = power factor.
CONNECTIONS
AC power input: Neutrik powerCON TRUE1
DMX data in/out: 3-pin & 5-pin locking XLR

THERMAL
Cooling: Forced air (temperature regulated, low noise)
Maximum ambient temperature (Ta max.): 40° C
Minimum ambient temperature (Ta min.): 0° C
Maximum surface temperature, steady state, at 40° C ambient: 70° C (158° F)
Total heat dissipation (calculated, +/- 10%): 1550 BTU/hr.

APPROVALS
EU safety: EN 60598-2-17 (EN 60598-1), EN 62471, EN 62493
EU EMC: EN 55015; EN 55032; EN 55035; EN 61000-3-2,-3; EN 61547
US safety: UL 1573
US EMC: FCC Part 15 Class B
Canadian safety: CSA C22.2 No. 166
Canadian EMC: ICES-003 Class B, ICES-005 Class B
Australia/NZ: RCM
Global CB Certification/IECEE: IEC 60598-2-17 (IEC 60598-1)

INCLUDED ITEMS
2 x Omega brackets for rigging clamp attachment

ACCESSORIES
Cables, 16 A, for connection to power in chains:
Power input cable, H07RN-F, 2.5 mm2, 14 AWG, bare ends to Neutrik TRUE1 NAC3FX-W (female), 1.5 m (4.9 ft.): P/N 91611797
Power input cable, H07RN-F, 2.5 mm2, 14 AWG, bare ends to Neutrik TRUE1 NAC3FX-W (female), 5 m (16.4 ft.): P/N 91611786
Power input cable, SJOOW, 12 AWG, bare ends to Neutrik TRUE1 NAC3FX-W (female), 1.5 m (4.9 ft.): P/N 91610173
Power input cable, SJOOW, 12 AWG, bare ends to Neutrik TRUE1 NAC3FX-W (female), 5 m (16.4 ft.): P/N 91610174


Cables, 16 A, for relaying power in chains:Power relay cable, H07RN-F, 2.5 mm2, TRUE1 to TRUE1, 0.45 m (1.5 ft.): P/N 91611784
Power relay cable, H07RN-F, 2.5 mm2, TRUE1 to TRUE1, 1.2 m (3.9 ft.): P/N 91611785
Power relay cable, H07RN-F, 2.5 mm2, TRUE1 to TRUE1, 2.5 m (8.2 ft.): P/N 91611786
Power relay cable, SJOOW, 12 AWG, TRUE1 to TRUE1, 0.45 m (1.5 ft.): P/N 91610170
Power relay cable, SJOOW, 12 AWG, TRUE1 to TRUE1, 1.2 m (3.9 ft.): P/N 91610171
Power relay cable, SJOOW, 12 AWG, TRUE1 to TRUE1, 2.5 m (8.2 ft.): P/N 91610172


Connectors:
Power connector, cable mount, Neutrik TRUE1 NAC3FX-W (female): P/N 91611789
Power connector, cable mount, Neutrik TRUE1 NAC3MX-W (male): P/N 91611788


Installation hardware:
G-clamp (suspension with fixture hanging vertically downwards only): P/N 91602003
Quick Trigger Clamp (suspension with fixture hanging vertically downwards only): P/N 91602007
Half-coupler Clamp: P/N 91602005
Safety Cable, SWL 60 kg, BGV C1 / DGUV 17, black: P/N 91604006
Safety Cable, SWL 60 kg, BGV C1 / DGUV 17, silver: P/N 91604007


RELATED ITEMS
Martin™ RDM 5.5 Splitter: P/N 90758150
Martin Companion Cable: P/N 91616091
Martin Companion Software Suite (including firmware uploader): .

ORDERING INFORMATION
Martin ERA 400 Performance WRM in cardboard box:
​P/N 9025121795
​
Flightcase, two unit for ERA 400: P/N 91511217

DOWNLOADS

ERA 400 Performance - User Manual
Design. Install. Maintain.
​
About Us
Trades Program
Privacy Policy
​Terms & Conditions
Contact
Address:
​516 Annette St.
Toronto, ON
M6P 1S3

Phone: 416-792-5588
​Email: info@flohentertainment.com 
  • BRANDS
    • Chauvet Pro >
      • EFFECTS
      • ELLIPSOIDAL
      • HOUSE LIGHTS
      • PIXEL MAPPING
      • MOVING HEADS
      • BLINDERS & STROBES
      • NETWORKING HARDWARE
    • Chauvet video >
      • Indoor Video
      • Outdoor Video
      • Video Accessories
    • Martin Lighting >
      • Effect Lights
      • Moving Heads
      • ATMOSPHERIC EFFECTS
      • Static
      • Architectural / Exterior
      • Martin Accessories
    • MADRIX >
      • Software / License Keys
      • Hardware
    • More Brands
  • RENTALS
  • LED Lighting
    • LED Strip
    • Aluminum Profiles
    • Controllers
    • Receivers
    • Smart Lights
    • Power Supplies
  • PORTFOLIO